单片机课程设计音乐盒

㈠ 单片机 数字音乐盒

延时，这个东东我原来做过，最早的程序模拟时播了一段音乐，发出扑扑扑的声音，就是延时部分没有做好，在发送声音频率时其实要维持一个短暂的时间，才能让音箱发出正确的声音
nop是空，即什么也不做，占芯片计算的时间而已

㈡ 单片机做的音乐盒有没有可以修改音乐的C语言程序啊

#include<reg52.h>
#define uchar unsigned char
#define uint unsigned int
uchar Count;

sbit Speak =P1^2; //蜂鸣器器控制脚
/*以下数组是音符编码*/
unsigned char code SONG[] ={ //祝你平安
0x26,0x20,0x20,0x20,0x20,0x20,0x26,0x10,0x20,0x10,0x20,0x80,0x26,0x20,0x30,0x20,
0x30,0x20,0x39,0x10,0x30,0x10,0x30,0x80,0x26,0x20,0x20,0x20,0x20,0x20,0x1c,0x20,
0x20,0x80,0x2b,0x20,0x26,0x20,0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x80,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x60,0x40,0x10,0x39,0x10,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x80,0x26,0x20,0x2b,0x10,0x2b,0x10,
0x2b,0x20,0x30,0x10,0x39,0x10,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x20,
0x20,0x10,0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x18,0x20,0x18,0x20,0x26,0x20,
0x20,0x20,0x20,0x40,0x26,0x20,0x2b,0x20,0x30,0x20,0x30,0x20,0x1c,0x20,0x20,0x20,
0x20,0x80,0x1c,0x20,0x1c,0x20,0x1c,0x20,0x30,0x20,0x30,0x60,0x39,0x10,0x30,0x10,
0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x10,0x26,0x10,0x26,0x10,0x2b,0x10,0x2b,0x80,
0x18,0x20,0x18,0x20,0x26,0x20,0x20,0x20,0x20,0x60,0x26,0x10,0x2b,0x20,0x30,0x20,
0x30,0x20,0x1c,0x20,0x20,0x20,0x20,0x80,0x26,0x20,0x30,0x10,0x30,0x10,0x30,0x20,
0x39,0x20,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x10,0x40,0x10,0x20,0x10,
0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x00,
//路边的野华不要采
0x30,0x1C,0x10,0x20,0x40,0x1C,0x10,0x18,0x10,0x20,0x10,0x1C,0x10,0x18,0x40,0x1C,
0x20,0x20,0x20,0x1C,0x20,0x18,0x20,0x20,0x80,0xFF,0x20,0x30,0x1C,0x10,0x18,0x20,
0x15,0x20,0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,
0x30,0x80,0xFF,0x20,0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,
0x20,0x2B,0x40,0x20,0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,
0x20,0x2B,0x40,0x20,0x30,0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,0x20,0x20,0x26,
0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,0x30,0x80,0x20,0x30,0x1C,0x10,0x20,
0x10,0x1C,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,0x15,0x1F,
0x05,0x20,0x10,0x1C,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,
0x30,0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,
0x20,0x26,0x20,0x20,0x20,0x30,0x30,0x20,0x30,0x1C,0x10,0x18,0x40,0x1C,0x20,0x20,
0x20,0x26,0x40,0x13,0x60,0x18,0x20,0x15,0x40,0x13,0x40,0x18,0x80,0x00,

};

/********************************************************************
* 名称 : Time0_Init()
* 功能 : 定时器的初始化，定时时间可用光碟中软件计算，11.0592MZ晶振，10ms
* 输入 : 无
* 输出 : 无
***********************************************************************/
void Time0_Init()
{
TMOD = 0x01;
IE = 0x82;
TH0 = 0xDC;
TL0 = 0x00;
}

/********************************************************************
* 名称 : Time0_Int()
* 功能 : 定时器中断，中断中实现 Count 加一
* 输入 : 无
* 输出 : 无
***********************************************************************/
void Time0_Int() interrupt 1
{
TH0 = 0xDC;
TL0 = 0x00;
Count++; //长度加1
}

/********************************************************************
* 名称 : Delay_xMs()
* 功能 : 延时子程序，经过软件调试，测得延时程序大概为55us.
* 输入 : x
* 输出 : 无
***********************************************************************/
void Delay_xMs(uint x)
{
uint i,j;
for(i=0; i<x; i++)
{
for(j=0; j<3; j++);
}
}

/********************************************************************
* 名称 : Play_Song()
* 功能 : 播放蜂鸣器控制程序
* 输入 : i (选择播放哪首歌曲，0为“祝你平安”，1为“路边的野花你不要采”
* 输出 : 无
***********************************************************************/
void Play_Song(uchar i)
{
uchar Temp1,Temp2;
uint Addr;
Count = 0; //中断计数器清0
Addr = i * 217;
while(1)
{
Temp1 = SONG[Addr++];
if (Temp1 == 0xFF) //休止符
{
TR0 = 0;
Delay_xMs(100);
}
else if (Temp1 == 0x00) //歌曲结束符
{
return;
}
else
{
Temp2 = SONG[Addr++];
TR0 = 1;
while(1)
{
Speak = ~Speak;
Delay_xMs(Temp1);
if(Temp2 == Count)
{
Count = 0;
break;
}
}
}
}
}
/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void Main()
{
Time0_Init(); //定时器0中断初始化
while(1)
{
Play_Song(0); //Play_Song(0)为祝你平安 Play_Song(1)为路边的野花你不要裁
}
}
看看

㈢ 求一篇基于51单片机音乐播放器的课程设计

看看我这的这个单片机音乐播放器行不行，Q我吧

㈣ 单片机怎么做音乐盒啊

我也在做只是还没做好下面的程序可以实现放1234567的音 如果换成谱子的话也是可以播放的，只是比较烦 还没做谱子
ORG 0000H
LJMP MAIN
ORG 001BH
LJMP YINFU
ORG 0030H
MAIN: MOV TMOD,#11H
SETB ET0
SETB ET1
SETB EA
SETB TR0
SETB TR1
MOV R2,#01H
MOV A,#00H
MOV TH1,#00H
MOV TL1,#00H
L0: MOV TL0,R0
MOV TH0,R1
L1: JNB TF0,L1
CPL P1.2
CPL TF0
SJMP L0

YINFU:MOV TH1,#00H
MOV TL1,#00H
DJNZ R2,L2
MOV R2,#64H
MOV R3,A
MOV DPTR,#CDEF
MOVC A,@A+DPTR
MOV R0,A
MOV A,R3
MOV DPTR,#GAB
MOVC A,@A+DPTR
MOV R1,A
MOV A,R3
INC A
L2: CLR TF0
RETI

CDEF: DB 0B2H,0B2H,026H,026H,0DDH,0DDH,008H,008H,01FH,01FH,017H,017H,088H,088H
GAB: DB 0F2H,0F2H,0F4H,0F4H,0F4H,0F4H,0F6H,0F6H,0F7H,0F7H,0F8H,0F8H,0F8H,0F8H
END

㈤ 求一份基于AT89C51单片机课程设计音乐盒，程序是C语言写的，不是汇编。在数码管上显示四首歌的序号，1~4。

#include <reg52.h>
#include "Music.h"
#include "SoundPlay.h"
#include "lcd.h"
#define SYSTEM_OSC 12000000 //定义晶振频率12000000HZ
#define SOUND_SPACE 4/5 //定义普通音符演奏的长度分率,//每4分音符间隔
sbit BeepIO = P2^0; //定义输出管脚
unsigned char code an[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};//an code 0~9
unsigned int code FreTab[12] = { 262,277,294,311,330,349,369,392,415,440,466,494 }; //原始频率表
unsigned char code SignTab[7] = { 0,2,4,5,7,9,11 }; //1~7在频率表中的位置
unsigned char code LengthTab[7]= { 1,2,4,8,16,32,64 };
unsigned char Sound_Temp_TH0,Sound_Temp_TL0; //音符定时器初值暂存
unsigned char Sound_Temp_TH1,Sound_Temp_TL1; //音长定时器初值暂存
//*******************************************************************
#define MaxNo 3 //定义歌曲数目
unsigned char code *Sound;
unsigned char code * code Music[MaxNo]={Music_4,Music_8,Music_7,Music_6,Music_5,Music_9,Music_3,Music_2,Music_1};
signed char FlagNo=0;
static unsigned char KeyScan(void);
static void Beep(void);
bit RunStop = 1;//1表示运行
sbit KeyB =P3^2; // 上一首
sbit KeyF =P3^3; //下一首
sbit KeyT =P3^5; //暂停
extern void Delay1ms(unsigned int);
void InitialSound(void)
{
BeepIO = 0;
Sound_Temp_TH1 = (65535-(1/1200)*SYSTEM_OSC)/256; // 计算TL1应装入的初值 (10ms的初装值)
Sound_Temp_TL1 = (65535-(1/1200)*SYSTEM_OSC)%256; // 计算TH1应装入的初值
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TMOD |= 0x11; //两个定时器都工作在方式1
ET0 = 1;
ET1 = 0;
TR0 = 0;
TR1 = 0;
EA = 1;
FlagNo = 0;
Sound = Music[FlagNo];
P1 = an[FlagNo+1];
}
void BeepTimer0(void) interrupt 1 //音符发生中断
{
BeepIO = !BeepIO;
TH0 = Sound_Temp_TH0;
TL0 = Sound_Temp_TL0;
}
//*******************************************************************
void Play(unsigned char Signature,unsigned Octachord,unsigned int Speed)
{
unsigned int NewFreTab[12]; //新的频率表
unsigned char i,j;
unsigned int Point,LDiv,LDiv0,LDiv1,LDiv2,LDiv4,CurrentFre,Temp_T,SoundLength;
unsigned char Tone,Length,SL,SH,SM,SLen,XG,FD;
#ifdef USE_LCD
lcd_init();
lcd_write_string(0,"MusicPlayer");
#endif
Again :
Delay1ms(600);
for(i=0;i<12;i++) // 根据调号及升降八度来生成新的频率表
{
j = i + Signature;
if(j > 11)
{
j = j-12;
NewFreTab[i] = FreTab[j]*2;
}
else
NewFreTab[i] = FreTab[j];
if(Octachord == 1)
NewFreTab[i]>>=2;
else if(Octachord == 3)
NewFreTab[i]<<=2;
}
SoundLength = 0;
while(Sound[SoundLength] != 0x00) //计算歌曲长度
{
SoundLength+=2;
}
Point = 0;
Tone = Sound[Point];
Length = Sound[Point+1]; // 读出第一个音符和它时时值
LDiv0 = 12000/Speed; // 算出1分音符的长度(几个10ms)
LDiv4 = LDiv0/4; // 算出4分音符的长度
LDiv4 = LDiv4-LDiv4*SOUND_SPACE; // 普通音最长间隔标准
TR0 = 0;
TR1 = 1;
while(Point < SoundLength)
{
if(KeyScan())goto Again; /*more keyscan for speed*/
SL=Tone%10; //计算出音符
SM=Tone/10%10; //计算出高低音
SH=Tone/100; //计算出是否升半
CurrentFre = NewFreTab[SignTab[SL-1]+SH]; //查出对应音符的频率
if(KeyScan())goto Again; /*more keyscan for speed*/
if(SL!=0)
{
if (SM==1) CurrentFre >>= 2; //低音
if (SM==3) CurrentFre <<= 2; //高音
Temp_T = 65536-(50000/CurrentFre)*10/(12000000/SYSTEM_OSC);//计算计数器初值
Sound_Temp_TH0 = Temp_T/256;
Sound_Temp_TL0 = Temp_T%256;
TH0 = Sound_Temp_TH0;
TL0 = Sound_Temp_TL0 + 12; //加12是对中断延时的补偿
}
if(KeyScan())goto Again; /*more keyscan for speed*/
SLen=LengthTab[Length%10]; //算出是几分音符
XG=Length/10%10; //算出音符类型(0普通1连音2顿音)
FD=Length/100;
LDiv=LDiv0/SLen; //算出连音音符演奏的长度(多少个10ms)
if (FD==1)
LDiv=LDiv+LDiv/2;
if(XG!=1)
if(XG==0) //算出普通音符的演奏长度
if (SLen<=4)
LDiv1=LDiv-LDiv4;
else
LDiv1=LDiv*SOUND_SPACE;
else
LDiv1=LDiv/2; //算出顿音的演奏长度
else
LDiv1=LDiv;
if(SL==0) LDiv1=0;
LDiv2=LDiv-LDiv1; //算出不发音的长度
if(KeyScan())goto Again; /*more keyscan for speed*/
if (SL!=0)
{
TR0=1;
for(i=LDiv1;i>0;i--) //发规定长度的音
{
while(TF1==0);
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TF1=0;
if(KeyScan())goto Again; /*more keyscan for speed*/
}
}
if(KeyScan())goto Again; /*more keyscan for speed*/
if(LDiv2!=0)
{
TR0=0; BeepIO=0;
for(i=LDiv2;i>0;i--) //音符间的间隔
{
while(TF1==0);
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TF1=0;
if(KeyScan())goto Again; /*more keyscan for speed*/
}
}
Point+=2;
Tone=Sound[Point];
Length=Sound[Point+1];
if(KeyScan())goto Again; /*more keyscan for speed*/
#ifdef USE_LCD
lcd_write_char(12,FlagNo+49);
#endif
}
BeepIO = 0;
FlagNo ++;
if (FlagNo == MaxNo)FlagNo =0;
Sound = Music[FlagNo];
P1 = an[FlagNo+1];
}
/**************************************************************
功能： 键盘扫描函数
入参： viod KeyF 下一首
KeyB 上一首
KeyT 暂停
返回： unsigned char
1 需跳转 0 不跳转
***************************************************************/
static unsigned char KeyScan(void)
{
unsigned char Cont;
if (KeyF == 0){ //前进
Delay1ms(5);
if (KeyF == 0){
while(KeyF == 0){
EA = 0;
FlagNo ++;
if (FlagNo == MaxNo)FlagNo =0;
P1 = an[FlagNo+1];
Beep();
Delay1ms(600); //是长按
EA = 1;
}
if (FlagNo == MaxNo)FlagNo =0;
Sound = Music[FlagNo];
P1= an[FlagNo+1]; //刷显示
while(KeyF == 0);
return 1;
}
}
if (KeyB == 0){ //后退
Delay1ms(5);
if (KeyB == 0){
while(KeyB == 0){
EA = 0;
FlagNo --;
if (FlagNo == -1)FlagNo =MaxNo-1;
P1 = an[FlagNo+1];//刷显示
Beep();
Delay1ms(600); //是长按
EA = 1;
}
if (FlagNo == -1)FlagNo =MaxNo-1;
Sound = Music[FlagNo];
P1 = an[FlagNo+1];
while(KeyB == 0);
return 1;
}
}
if (KeyT == 0){ //暂停
Delay1ms(20);
Cont = 0;
EA = 0;
TR0 = 0;
TR1 = 0;
if (KeyT == 0){
RunStop = ~RunStop;
while(KeyT == 0); //等待第一次释放
Beep();
if (!RunStop){ //是暂停 则关中断和定时器
EA = 0;
TR0 = 0;
TR1 = 0;
while(KeyT == 0); //检测第二次按键 并等待它释放（若有的话）
while (KeyT){ //第二次释放了 等待第三次按下
P1 = an[Cont++%10]; //第三次未按下 则暂停数秒0~9
Delay1ms(100);
} //此处暂停 直到再次有按键低电平
EA = 1; //重开定时器和中断
TR0 = 1;
TR1 = 1;
Sound = Music[FlagNo];
P1 = an[FlagNo+1]; //恢复原来的显示
}
}
EA = 1;
TR0 = 1;
TR1 = 1;
return 0;
}
return 0;
}
void Beep(void)
{
unsigned char i;
for(i = 0;i < 200 ;i ++){
BeepIO = ~BeepIO;
Delay1ms(1);
}
}
Playmusic：
#include <REG52.H>
#include "Music.h"
#include "SoundPlay.h"
void Delay1ms(unsigned int count)
{
unsigned int i,j;
for(i=0;i<count;i++)
for(j=0;j<120;j++);
}
main()
{
InitialSound();
while(1)
{
Play(0,3,380);
Delay1ms(500);
}
}
Music:
#include "Music.h" //*****************************Music********************************
//挥着翅膀的女孩
unsigned char code Music_1[]={
0x17,0x02, 0x17,0x03, 0x18,0x03, 0x19,0x02, 0x15,0x03,
0x16,0x03, 0x17,0x03, 0x17,0x03, 0x17,0x03, 0x18,0x03,
0x19,0x02, 0x16,0x03, 0x17,0x03, 0x18,0x02, 0x18,0x03,
0x17,0x03, 0x15,0x02, 0x18,0x03, 0x17,0x03, 0x18,0x02,
0x10,0x03, 0x15,0x03, 0x16,0x02, 0x15,0x03, 0x16,0x03,
0x17,0x02, 0x17,0x03, 0x18,0x03, 0x19,0x02, 0x1A,0x03,
0x1B,0x03, 0x1F,0x03, 0x1F,0x03, 0x17,0x03, 0x18,0x03,
0x19,0x02, 0x16,0x03, 0x17,0x03, 0x18,0x03, 0x17,0x03,
0x18,0x03, 0x1F,0x03, 0x1F,0x02, 0x16,0x03, 0x17,0x03,
0x18,0x03, 0x17,0x03, 0x18,0x03, 0x20,0x03, 0x20,0x02,
0x1F,0x03, 0x1B,0x03, 0x1F,0x66, 0x20,0x03, 0x21,0x03,
0x20,0x03, 0x1F,0x03, 0x1B,0x03, 0x1F,0x66, 0x1F,0x03,
0x1B,0x03, 0x19,0x03, 0x19,0x03, 0x15,0x03, 0x1A,0x66,
0x1A,0x03, 0x19,0x03, 0x15,0x03, 0x15,0x03, 0x17,0x03,
0x16,0x66, 0x17,0x04, 0x18,0x04, 0x18,0x03, 0x19,0x03,
0x1F,0x03, 0x1B,0x03, 0x1F,0x66, 0x20,0x03, 0x21,0x03,
0x20,0x03, 0x1F,0x03, 0x1B,0x03, 0x1F,0x66, 0x1F,0x03,
0x1B,0x03, 0x19,0x03, 0x19,0x03, 0x15,0x03, 0x1A,0x66,
0x1A,0x03, 0x19,0x03, 0x19,0x03, 0x1F,0x03, 0x1B,0x03,
0x1F,0x00, 0x1A,0x03, 0x1A,0x03, 0x1A,0x03, 0x1B,0x03,
0x1B,0x03, 0x1A,0x03, 0x19,0x03, 0x19,0x02, 0x17,0x03,
0x15,0x17, 0x15,0x03, 0x16,0x03, 0x17,0x03, 0x18,0x03,
0x17,0x04, 0x18,0x0E, 0x18,0x03, 0x17,0x04, 0x18,0x0E,
0x18,0x66, 0x17,0x03, 0x18,0x03, 0x17,0x03, 0x18,0x03,
0x20,0x03, 0x20,0x02, 0x1F,0x03, 0x1B,0x03, 0x1F,0x66,
0x20,0x03, 0x21,0x03, 0x20,0x03, 0x1F,0x03, 0x1B,0x03,
0x1F,0x66, 0x1F,0x04, 0x1B,0x0E, 0x1B,0x03, 0x19,0x03,
0x19,0x03, 0x15,0x03, 0x1A,0x66, 0x1A,0x03, 0x19,0x03,
0x15,0x03, 0x15,0x03, 0x17,0x03, 0x16,0x66, 0x17,0x04,
0x18,0x04, 0x18,0x03, 0x19,0x03, 0x1F,0x03, 0x1B,0x03,
0x1F,0x66, 0x20,0x03, 0x21,0x03, 0x20,0x03, 0x1F,0x03,
0x1B,0x03, 0x1F,0x66, 0x1F,0x03, 0x1B,0x03, 0x19,0x03,
0x19,0x03, 0x15,0x03, 0x1A,0x66, 0x1A,0x03, 0x19,0x03,
0x19,0x03, 0x1F,0x03, 0x1B,0x03, 0x1F,0x00, 0x18,0x02,
0x18,0x03, 0x1A,0x03, 0x19,0x0D, 0x15,0x03, 0x15,0x02,
0x18,0x66, 0x16,0x02, 0x17,0x02, 0x15,0x00, 0x00,0x00};
//同一首歌
unsigned char code Music_2[]={
0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x66, 0x18,0x03,
0x17,0x02, 0x15,0x02, 0x16,0x01, 0x15,0x02, 0x10,0x02
0x15,0x00, 0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x02,
0x17,0x03, 0x18,0x03, 0x19,0x02, 0x15,0x02, 0x18,0x66,
0x17,0x03, 0x19,0x02, 0x16,0x03, 0x17,0x03, 0x16,0x00,
0x17,0x01, 0x19,0x02, 0x1B,0x02, 0x1B,0x70, 0x1A,0x03,
0x1A,0x01, 0x19,0x02, 0x19,0x03, 0x1A,0x03, 0x1B,0x02,
0x1A,0x0D, 0x19,0x03, 0x17,0x00, 0x18,0x66, 0x18,0x03,
0x19,0x02, 0x1A,0x02, 0x19,0x0C, 0x18,0x0D, 0x17,0x03,
0x16,0x01, 0x11,0x02, 0x11,0x03, 0x10,0x03, 0x0F,0x0C,
0x10,0x02, 0x15,0x00, 0x1F,0x01, 0x1A,0x01, 0x18,0x66,
0x19,0x03, 0x1A,0x01, 0x1B,0x02, 0x1B,0x03, 0x1B,0x03,
0x1B,0x0C, 0x1A,0x0D, 0x19,0x03, 0x17,0x00, 0x1F,0x01,
0x1A,0x01, 0x18,0x66, 0x19,0x03, 0x1A,0x01, 0x10,0x02,
0x10,0x03, 0x10,0x03, 0x1A,0x0C, 0x18,0x0D, 0x17,0x03,
0x16,0x00, 0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x70,
0x18,0x03, 0x17,0x02, 0x15,0x03, 0x15,0x03, 0x16,0x66,
0x16,0x03, 0x16,0x02, 0x16,0x03, 0x15,0x03, 0x10,0x02,
0x10,0x01, 0x11,0x01, 0x11,0x66, 0x10,0x03, 0x0F,0x0C,
0x1A,0x02, 0x19,0x02, 0x16,0x03, 0x16,0x03, 0x18,0x66,
0x18,0x03, 0x18,0x02, 0x17,0x03, 0x16,0x03, 0x19,0x00,
0x00,0x00 };
//两只蝴蝶
unsigned char code Music_3[] ={
0x17,0x03, 0x16,0x03, 0x17,0x01, 0x16,0x03, 0x17,0x03,
0x16,0x03, 0x15,0x01, 0x10,0x03, 0x15,0x03, 0x16,0x02,
0x16,0x0D, 0x17,0x03, 0x16,0x03, 0x15,0x03, 0x10,0x03,
0x10,0x0E, 0x15,0x04, 0x0F,0x01, 0x17,0x03, 0x16,0x03,
0x17,0x01, 0x16,0x03, 0x17,0x03, 0x16,0x03, 0x15,0x01,
0x10,0x03, 0x15,0x03, 0x16,0x02, 0x16,0x0D, 0x17,0x03,
0x16,0x03, 0x15,0x03, 0x10,0x03, 0x15,0x03, 0x16,0x01,
0x17,0x03, 0x16,0x03, 0x17,0x01, 0x16,0x03, 0x17,0x03,
0x16,0x03, 0x15,0x01, 0x10,0x03, 0x15,0x03, 0x16,0x02,
0x16,0x0D, 0x17,0x03, 0x16,0x03, 0x15,0x03, 0x10,0x03,
0x10,0x0E, 0x15,0x04, 0x0F,0x01, 0x17,0x03, 0x19,0x03,
0x19,0x01, 0x19,0x03, 0x1A,0x03, 0x19,0x03, 0x17,0x01,
0x16,0x03, 0x16,0x03, 0x16,0x02, 0x16,0x0D, 0x17,0x03,
0x16,0x03, 0x15,0x03, 0x10,0x03, 0x10,0x0D, 0x15,0x00,
0x19,0x03, 0x19,0x03, 0x1A,0x03, 0x1F,0x03, 0x1B,0x03,
0x1B,0x03, 0x1A,0x03, 0x17,0x0D, 0x16,0x03, 0x16,0x03,
0x16,0x0D, 0x17,0x01, 0x17,0x03, 0x17,0x03, 0x19,0x03,
0x1A,0x02, 0x1A,0x02, 0x10,0x03, 0x17,0x0D, 0x16,0x03,
0x16,0x01, 0x17,0x03, 0x19,0x03, 0x19,0x03, 0x17,0x03,
0x19,0x02, 0x1F,0x02, 0x1B,0x03, 0x1A,0x03, 0x1A,0x0E,
0x1B,0x04, 0x17,0x02, 0x1A,0x03, 0x1A,0x03, 0x1A,0x0E,
0x1B,0x04, 0x1A,0x03, 0x19,0x03, 0x17,0x03, 0x16,0x03,
0x17,0x0D, 0x16,0x03, 0x17,0x03, 0x19,0x01, 0x19,0x03,
0x19,0x03, 0x1A,0x03, 0x1F,0x03, 0x1B,0x03, 0x1B,0x03,
0x1A,0x03, 0x17,0x0D, 0x16,0x03, 0x16,0x03, 0x16,0x03,
0x17,0x01, 0x17,0x03, 0x17,0x03, 0x19,0x03, 0x1A,0x02,
0x1A,0x02, 0x10,0x03, 0x17,0x0D, 0x16,0x03, 0x16,0x01,
0x17,0x03, 0x19,0x03, 0x19,0x03, 0x17,0x03, 0x19,0x03,
0x1F,0x02, 0x1B,0x03, 0x1A,0x03, 0x1A,0x0E, 0x1B,0x04,
0x17,0x02, 0x1A,0x03, 0x1A,0x03, 0x1A,0x0E, 0x1B,0x04,
0x17,0x16, 0x1A,0x03, 0x1A,0x03, 0x1A,0x0E, 0x1B,0x04,
0x1A,0x03, 0x19,0x03, 0x17,0x03, 0x16,0x03, 0x0F,0x02,
0x10,0x03, 0x15,0x00, 0x00,0x00 };

㈥ 单片机电子音乐盒设计程序

这个用51单片机就可以呀。需要一个三极管驱动蜂鸣器，然后用一个stc12c5a系列的单片机，使用它内部的pwm波发生模块产生不同的波段就可以了，再加一个液晶屏幕，写一个显示程序就可以啦。给你一个我的pwm程序和显示程序，需要你自己改哦。如果不会可以问我。